You can try to fix your laptop charger port by using a toothpick. The toothpick must be long one. Put the toothpick into the port and try to clean it. You can also use a wet paper towel or a dry towel to clean the port.
Why is my Laptop Charger Plugging Into the Laptop?
In most cases, your laptop charger plugs into the laptop because the laptop port is located at the back of the device. Your laptop cord may be placed in a different location, but this is very uncommon. In most cases, you will find a rectangular port on the side or back of your laptop that will match with a rectangular end on your power cord.
The port called “laptop port” is not always recognizable as a charging connector. It can be located on either side or at the rear of a laptop and has a small opening in it which sometimes has markings to indicate its purpose.
You should also check if you have an external power source such as an outlet nearby and if so, you can plug it directly into there for charging.
What Causes a Laptop Charger Port to Become Unresponsive?
One of the major reasons that a laptop charger port becomes unresponsive is when the power cord is unplugged.
The plug on your laptop charger port should work by making contact with the pins on your laptop. If it doesn’t, it might need to be replaced. Some other things that might cause a laptop charger port to become unresponsive are: dirt or debris in the area, pressure applied to the cable, or improper alignment of pins with the cable plug.
How Often Should You Have Your Laptop Charger Port Replaced?
Regular laptop chargers are not as durable as they used to be. The port is usually the first thing to go, so it’s important to have it repaired or replaced at least once a year.
There are a few things that you can do to prevent this from happening. One of them is using a laptop stand. This will put less pressure on the charger port and will also help with cooling the device during use. Another option would be purchasing a more expensive but more durable charger that will last longer and not break as easily.
Conclusion: Fix Your Broken Laptop Charger Port
There are two ways to fix a laptop charger port:
(1) Use a toothpick and
(2) Use needle-nosed pliers.
To fix a laptop charger port with a toothpick: Insert the toothpick into the connector when plugging in with the power cord. Push down gently, then wiggle it back and forth to loosen up any dirt or debris.
To fix a laptop charger port with needle-nosed pliers: Twist the metal connectors just enough so that they touch each other again and can conduct electricity.
